Part Number Hot Search : 
AT89C5 127306FS 1000F UV1024ST P3407 PE6832 HW300B PS2606
Product Description
Full Text Search
 

To Download OFA3JP2AB Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
3.3V SURFACE MOUNT LVCMOS STRATUM 3 OCXO
ABSOLUTE M AXIMUM RATING S
PARAMETER Storage Temperature Supply Voltage (Vcc) UNITS MINIMUM -55 -0.5 NOMINAL MAXIMUM 125 4.5 UNITS C Vdc TABLE 2.0 MINIMUM (Fo) 1.544 -1.5 -0.20 -4.6 -30 -3.0 -40 (Vcc) (Icc) 3.135 3.3 -60 -90 -120 -140 -145 -150 NOMINAL MAXIMUM 20.0 1.5 0.20 4.6 30 3.0 85 3.465 700 1 50 5 UNITS MHz ppm ppm ppm ppb ppm C Vdc mA ps RMS dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ms Minutes 1,4 2 3 4 NOTE TABLE 1.0 NOTE
0644 OFA3JP2AB 12.8 MHZ
OFA3JP2AB
DESCRIPTION
OPERATING SPECIFIC ATIONS
PARAMETER Center Frequency Frequency Calibration Frequency Stability Total Frequency Tolerance Aging (Daily) Aging (20 years) Operating Temperature Range Supply Voltage Supply Current Jitter (BW =10KHz to Fo/2) SSB Phase Noise at 1 Hz offset SSB Phase Noise at 10 Hz offset SSB Phase Noise at 100 Hz offset SSB Phase Noise at 1 KHz offset SSB Phase Noise at 10 KHz offset SSB Phase Noise at 100 KHz offset Start-Up Time: Oscillator Warm Up Time
The Connor-Winfield OFA3JP2AB is a true Surface Mount 3.3V Oven Controlled Crystal Oscillator (OCXO) with an LVCMOS output. The OFA3JP2AB is designed for Stratum 3 applications requiring tight frequency stability and low jitter.
FEATURES
5 TABLE 3.0
FIXED FREQUENCY OCXO 3.3V OPERATION LOW JITTER <1pS RMS FREQUENCY STABILITY: 0.20ppm TEMPERATURE RANGE: -40 to 85C FREQUENCY TOLERANCE: 4.6ppm OVER 20 YEARS SURFACE MOUNT PACKAGE
LVCMOS OUTPUT CHARACTERISTICS
PARAMETER LOAD Voltage (High) (Low) Current (High) (Low) Duty Cycle at 50% of Vcc Rise / Fall Time 10% to 90% (Voh) (Vol) (Ioh) (Iol) MINIMUM 12 3.0 -4 45 NOMINAL 15 50 MAXIMUM 18 0.4 4 55 6 UNITS pF Vdc Vdc mA mA % ns
NOTE
PACKAG E CHARACTERISTICS
Package
TABLE 4.0 Surface Mount, Non-hermetic package consisting of an FR4 substrate with grounded metal cover. TABLE 5.0 See solder profile on page 2. Ultrasonic cleaning is not recommended
TAPE AND REEL PACKAGING RoHS COMPLIANT / LEAD FREE
PROCESS RECOMMENDATIONS
Soldering Process Wash
Notes: 1) Initial calibration @ 25C 2) Frequency vs. temperature stability, peak to peak, -40 to 85C. 3) Inclusive of calibration, operating tem perature range, supply voltage change, shock and vibration and aging (20 years). 4) Specifications at time of shipm ent after 48 hours of operation. 5) Measured @ 25C, within 5 minutes, the unit will be within +/-0.1ppm of its reference frequency, measured after 30 m inutes of continuous operation at a stab le 25C.
DATA SHEET #: Cx107 PAGE 1 OF 2 REV: 01 DATE: 02/19/07
ORDERING INFORMATION
OFA3JP2AB - 12.80MHz
OCXO SERIES CENTER FREQUENCY
Specifications subject to change without notice.
aCopyright 2001 Connor-Winfield all rights reserved.
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
ENVIRONMENTAL CHARACTERISTICS Temperature Cycle: Per MIL-STD-883, Method 1010, Condition B. -55C to 125C, 300 cycles, 10 minute dwell, 1 minute transition. MECHANICAL CHARACTERISTICS Vibration: Per MIL-STD-202, Method 204, Condition A. 10G's peak, 10Hz to 500Hz, 15 minute cycles, 12 times each perpendicular axis. Shock: Per MIL-STD-202, Method 213, Condition F. 1500G's, 1.0ms, half sine, 3 shocks per direction. Moisture Resistance: Per MIL-STD-202, Method 106. 95% RH @ 65C, 10 cycles 10C to 65C.
Solder Profile
Pin Connections
Pin 1 2 3 4 5 TABLE 6.0 Function N/C N/C Vcc Output Ground (Case)
Package Drawing
0644 OFA3JP2AB 12.8 MHZ
Temperatures are measured at the OCXO
Output Waveform
.365 MAX (9.27mm)
90%
1.010 MAX (25.7mm)
.100 (2.5mm)
50%
.880 MAX (22.35mm)
.7350 (8.89mm)
.100 (2.5mm)
10%
.700 (17.8mm)
R .030 (.75mm)
Test Circuit
Suggested Pad Layout
.110 (2.79mm) 1.010 (25.65mm) .110 (2.79mm)
1 5
2
3 4
.350 (8.89mm) .810 (20.57mm) .350 (8.89mm)
.110 (2.79mm)
.110 (2.79mm)
Specifications subject to change without notice. DATA SHEET #: Cx107 PAGE 2 OF 2 REV: 01 DATE: 07/19/07
aCopyright 2001 Connor-Winfield all rights reserved.


▲Up To Search▲   

 
Price & Availability of OFA3JP2AB

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X